Categories

Contact Us

WTSML Heat Transfer Technology Co.,Ltd

Add: Qiaoxing Road 150, Torch Industrial Zone, Licheng Area, Quanzhou, Fujian, China

Tel:86 595 22168106

Moble:86 13559647260

Fax:86 595 22142090

Email: phe@wtsml.net

http://www.heatexchangersgasket.com

Plate Heat Exchanger Gasket Types

Plate Heat Exchanger Gasket Types
1.NON OEM Plates&Gaskets 100% Compatible With Alfa Laval Plate Heat Exchangers
2.Alfa Lava Plates:SMO254, Nickel201, C-276
3.Heat Gasket Material: EPDM HT, NBRP,FKM,FKMG
Product Details

Plate Heat Exchanger Gasket Types


   The sealing of the gasket is divided into two categories: adhesive fixing and non-bonding fixing. The gasket shape should be consistent with the shape of the plate heat exchanger seal. It must be pointed that the adhesive fixing method does not have any effect on the sealing function.

1.Non-bonded seal (1)Alignment: Place the seal in place(2)Put in: make the sealing ring enter the sealing groove correctly (3)Compression: In the sealing groove, there is a trough structure with a gradually decreasing cross section to position the sealing ring

2.Adhesive seal

   Depending on the purpose and the quality of the seal, blending sealants and non-harmonic sealants from different manufacturers can be used. Before bonding, a vapor stream should be used to remove the adhesive remaining on the bonding surface and the residual gasket. For blended sealant bonding, the residual adhesive and residual gasket on the phe bonding surface must be burned out. When bonding in large quantities, the liquid nitrogen tank of the frozen seal should be prepared and prepared as a plate heat exchange gasket with a gasket. When bonding in large quantities, the liquid nitrogen tank of the frozen seal should be prepared,and the heating furnace for drying the plate heat exchanger with gasket should be prepared. The heating temperature should be 160 ° C. If conditions permit, the plate should be prepared. The heat exchanger is chemically cleaned to ensure complete removal of the gasket of the bond remaining in the bonded surface of the plate heat exchanger.If possible, the plate heat exchanger should be chemically cleaned to ensure complete removal the gasket bond remaining in the joint surface of the plate heat

Plate Heat Exchanger Gasket Types

Hot Tags: plate heat exchanger gasket types China, manufacturers, suppliers, factory, pricelist, quotation, buy, price
Related Products
Contact Now