WTSML Heat Transfer Technology Co.,Ltd
Add: Qiaoxing Road 150, Torch Industrial Zone, Licheng Area, Quanzhou, Fujian, China
Tel:86 595 22168106
Fax:86 595 22142090
Plate Type Heat Exchanger Advantages
1.Safe and reliable useful
Two seals are designed between the plates, and signal holes are provided at the same time. In the event of a leak, it may be external. It is to prevent the mixing of the two media to play a security alert.
2.Small amount of cooling water
Due to the geometry of the flow path and the high thermal efficiency of both liquids, the plate heat exchanger can greatly reduce the amount of cooling water. It also reduces the installation cost of pipes, valves and pumps.
3.The use of low temperature heat sources is beneficial
Due to the almost full countercurrent flow and the two media high heat transfer, the temperature of the two media heat exchangers can reach a minimum of 1 °C. It is the ideal equipment to recover waste heat utilization or low body temperature. Under the same conditions, the heat transfer coefficient of the heat exchanger can be controlled in the range of 1/3 of the tube heat exchanger by selecting a reasonable flow resistance loss.
Related Industry Knowledge
- Characteristics of shell and tube h...
- Structure of air cooler
- The structure of the APV plate type...
- The introduction of plate heat exch...
- The structure classification of pla...
- Positioning system of heat exchange...
- Matters needing attention in heat e...
- The scope of application of Alfa La...
- Performance of compressor
- What Is A Heat Exchanger Gasket
- Plate Heat Exchanger Internal Leak
- Plate Heat Exchanger Energy Savings
- Plate Heat Exchanger Corrosion
- Plate Heat Exchanger Channels And P...
- Plate Heat Exchanger Design Calcula...
- Plate Heat Exchanger Selection
- Plate Heat Exchanger Desulfurization
- Cleaning method for scaling of plat...
- Heat exchanger introduction
- Heat exchanger effect