WTSML Heat Transfer Technology Co.,Ltd
Add: Qiaoxing Road 150, Torch Industrial Zone, Licheng Area, Quanzhou, Fujian, China
Tel:86 595 22168106
Fax:86 595 22142090
Install cautions of plate heat exchanger
(1)After unpacking, the equipment shall be inspected item by item as listed in the packing list. If the equipment does not meet the requirements, the supplier shall be informed by letter and the problem shall be solved in time.
(2)There are hoisting holes designed on the equipment for hoisting. Before hoisting, select the wire rope according to the quality marked on the nameplate.
(3)Plate heat exchangers should be placed horizontally, in places where there is no pipe or other equipment clogging, so that there is about one meter of operating space around the equipment for easy maintenance.
(4)If the outlet pressure of the pump is greater than the pressure of the equipment, the pressure reducing valve shall be installed in the pipeline where the fluid enters the equipment.
(5)If the pressure control valve is assembled, it should be installed on the inlet pipe of the equipment instead of the outlet.
(6)The inlet and outlet pipelines of the equipment shall be cleaned before installation to prevent debris such as sand, oil and welding slag from entering the equipment to avoid internal blockage or damage to the plates.
- High Flux Heat Exchanger Technology
- Structure Of Shell And Tube Heat Ex...
- Introduction Of Air Cooler
- The Characteristics Of APV Plate He...
- Type Plate Heat Exchanger Gasket
- Gasket Structure Characteristics
- Heat Exchanger Plate Sealing Principle
- Classification Of Heat Exchanger Ap...
- The Characteristics Of Alfa Laval P...
- The Application Scope Of SONDEX Hea...
- Heat Exchanger Plate Replacement
- Plate Heat Exchanger LMTD